Multiparameter Water Analyzer

M300F Benchtop Multiparameter Water Analyzer

Benchtop Multiparameter Water Analyzer pH EC TDS Conductivity DO Temperature ion meter

pH/EC/ISE/DO/Temp

Test parameter

Product Details Characteristics Parameter Message

Product Details

Features
1.High resolution LCD display, 5.7 inches.
2.Multi-reading feature allows auto-read, timed-read and continuous-read.
3.Automatic/Manual temperature compensation ensures accurate results.
4.Auto-hold feature senses and locks the measurement endpoint.
5.Data Storage 500 sets (GLP-compliant).
6.Support for USB or RS-232 communication.
7.Reset feature automatically resumes all settings back to factory default options.
8.IP54 waterproof.

Accessories
1.E-301-QC 3 in 1 pH composite electrode
2.DJS-1VTC EC electrode
3.DO-958-Q polarographic DO electrode
4.NIST pH standard solution(4.01, 7.00, 10.01) ，50ml/vial
5.1413μS/cm EC standard solution, 50ml, 1 vial
6.Electrode stand

Characteristics

pH: 1-5 points calibration with Standard Recognition. Selectable pH buffer groups, including NIST, DIN, GB.

DO: Support for air-saturated water or zero oxygen calibration. Auto barometric pressure compensation. Manual Salinity Factor Correction. Selectable pressure unit, including kPa, mbar, Torr, Atm.

Conductivity: 1-3 points calibration with Standard Recognition. Settable parameters, including cell constant, temperature compensation coefficient and TDS factor.Temperature compensation type (none, linear, pure water).

Ion: 1-5 points calibration. Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, PX, etc. Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode. Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.

Tags:

Benchtop multiparameter water quality meter

Parameter

Model		M300F
Parameters		pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation)
pH	Range	-2.00 to 20.00pH
	Resolution	0.1, 0.01 pH
	Accuracy	±0.01 pH
	Calibration Points	Up to 5
	Standard Customization	Yes
	Standard Recognition	NIST, GB, USA and DIN buffers
	Slope Limit	Yes
mV	Range	-2000.0 to 2000.0 mV
	Resolution	0.1 mV
	Accuracy	±0.3 mV or ±0.1%
pX	Range	-2.00 to 20.00 pX
	Resolution	0.1, 0.01 pX
	Accuracy	±0.01 pX
	Calibration Points	Up to 5
ISE	Range	1.000e-9 to 9.999e+9
	Unit	mol/L, mmol/L, g/L, mg/L, μg/L, ppm, ppb
	Resolution	Up to 4 significant digits
	Accuracy	±0.5%
	Calibration Points	Up to 5
Conductivity	Range	0.000 μS/cm to 1000 mS/cm
	Resolution	0.001 μS/cm minimum, various with range selection
	Accuracy	±1.0% FS
	Reference Temperature	20, 25 ºC
	Calibration Points	Up to 3
	Standard Recognition	84μS/cm, 1413μS/cm, 12.88mS/cm
Resistivity	Range	5.00 Ω·cm~20.00 MΩ·cm
	Resolution	0.01 Ω·cm minimum
	Accuracy	±1.0% FS
TDS	Range	0.00 ppm~300 ppt
	Resolution	0.01mg/L minimum, various with range selection
	Accuracy	±1.0% FS
Salinity	Range	0.0~80.0 ppt
	Resolution	0.1ppt
	Accuracy	±2ppt
Dissolved Oxygen Concentration	Range	0.00 to 20.00 ppm
	Resolution	0.01 ppm
	Accuracy	±0.10 ppm
	Calibration Points	Air-saturated water or zero point
	Barometric Compensation	Yes
	Manual Salinity Factor Correction	Yes
Saturation	Range	(0.0 to 200.0)%
	Resolution	0.1%
	Accuracy	±2.0%
Temperature	Range	-5 to 110 ºC, 23 to 230 ºF
	Unit	ºC, ºF
	Resolution	0.1
	Accuracy	±0.2
Measurement	Reading Mode	Auto Read (Fast, Medium, Slow), Timed, Continuous
	Reading Prompts	Reading, Stable, Locked
	Temp. Compensation	ATC, MTC
Data management	Data Storage	500 results each
Data management	GLP Features	Yes
Inputs	pH Electrode	BNC(Q9)
	DO with Temp. Probe	4-pin aviation connector
	Conductivity with Temp. Probe	5-pin aviation connector
Outputs	USB	PC
Outputs	RS 232	printer
Display options	Backlight	Yes
	Auto Shutdown	1~60 min, off
	IP Rating	IP54
	Date and Time	Yes
General	Power	AC Adapter, 100-240V AC input, DC9V output
	Dimensions	242×195×68 mm
	Weight	900g (1.98 lb)
	Dimensions (Carton)	370×305×330 mm
	Weight (Gross)	3.5 kg

Message