Explosion Proof Rotary Evaporator

Product Details Characteristics Parameter Message

Product Details

Explosion proof rotary evaporator uses Explosion-proof motor, explosion-proof aluminum shell of frequency conversion speed controller, explosion-proof aluminum shell of the control meter on the bath, explosion-proof tube with cable.

Characteristics

The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.

The stent is made of cold plate anti-corrosive spray + aluminum alloy material, and the bath is made of 304 stainless steel.

The sealing system uses PTFE + fluororubber compound sealing. Over-temperature protection function, when the actual temperature> setting temperature+5 ℃, the machine will automatically power off.

Oily vacuum pressure gauge shows real-time vacuum by pointer. Vacuum switching valve can continuously collect and discharge materials without affecting the system vacuum and solution distillation.

The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation flask under vacuum status.

Large LCD display, which can control rotation, heating and lifting at the same time. Anti-drying function, when the water level in the heating pot is lower than the heating tube, the machine will automatically power off.

Using brushless deceleration booster motor as rotary motor, no spark and low noise. Lifting motor also use this kind of motor.

Thermostat controlled bath, with PT100 sensor + stainless steel probe at the bottom of bath.

Upright three-layer serpentine coil condenser, main cooling + auxiliary cooling double condensers.

The bath can be lifted electrically. A silicone cover is equipped outside the bath for heat insulation and anti-scalding.

Rotating and heating double fuses safety protection. There is a water discharging valve at the bottom of the bath to facilitate liquid discharge.

The collection flask has a lower discharging port, which is connected to a glass + PTFE independent discharging valve.

Tags:

Explosion-proof rotary evaporator equipment

Parameter

Model	CE-EX1010	CE-EX1020	CE-EX1050
Voltage/Frequency	220V/50HZ 110V/60HZ	220V/50HZ 110V/60HZ	220V/50HZ 110V/60HZ
Total power	3180W	5180W	6780W
Rotary motor power	60W 1/5	60W 1/5	100W 1/5
Lifting motor power	EX120W	EX120W	EX180W
Heating power	3000W	5000W	6500W
Vacuum degree	0.095Mpa	0.095Mpa	0.095Mpa
Rotary flask volume	10L,Φ280mm/Φ95 Flange port	20L,Φ355mm/Φ95 Flange port	50L,Φ355mm/Φ125 Flange port
Collecting flask volume	5L,Φ230mm/ upper with Φ60 Φ35 flange port2*lower with Φ50 flange port	10L,Φ355mm/ upper with Φ60 Φ35 flange port2*lower with Φ50 flange port	20L,Φ355mm/ upper with Φ60 Φ35 flange port2*lower with Φ50 flange port
Rotary speed	0-120rpm/min	0-120rpm/min	0-120rpm/min
Temperature.cotrol range	room temperature -180℃	room temperature -180℃	room temperature -180℃
Temperature accuracy	±1℃	±1℃	±1℃
Bath lifting stroke	190mm	150mm	215mm
Condenser size	The main condensor Φ120620H(mm) upper with Φ60 flange port lower with Φ80 flange port The assisted condensor Φ135475H(mm) upper with Φ80 flange port lower with Φ60 flange port*side with Φ60 flange port	The main condensor Φ130700H(mm) upper with Φ60 flange port lower with Φ80 flange port The assisted condensor Φ160530H(mm) upper with Φ80 flange port lower with Φ60 flange port*side with Φ60 flange port	The main condensor Φ160835H(mm) upper with Φ60 flange port lower with Φ80 flange port The assisted condensor Φ160530H(mm) upper with Φ80 flange port lower with Φ60 flange port*side with Φ60 flange port
Condensation area	0.51(0.33+0.18)㎡	0.94(0.46+0.48)㎡	1.44(0.95+0.49)㎡
Gas cylinder	Left with Φ35 flange，upper with Φ35flange，side with Φ60 flange，right with Φ60 flange	Left with Φ35 flange，upper with Φ35flange，side with Φ60 flange，right with Φ60 flange	Left with Φ35 flange，upper with Φ35flange，side with Φ60 flange，right with Φ70 flange
Material feeding valve	Φ35 flange，glass+PTFE valve，feeding nozzle (pagoda-shape connectors) outer diameter 12mm	Φ35 flange，glass+PTFE valve，feeding nozzle (pagoda-shape connectors) outer diameter 12mm	Φ35 flange，glass+PTFE valve，feeding nozzle (pagoda-shape connectors) outer diameter 12mm
Multi-function port		Φ35 flange，glass+PTFE valve, glass nozzle (pagoda-shape connectors) outer diameter 12mm	Φ35 flange，glass+PTFE valve, glass nozzle (pagoda-shape connectors) outer diameter 12mm
Vacuum nozzle	Φ60 flange glass exhaustor, suction nozzle (pagoda-shape connectors), outer diameter 10mm	Φ60 flange glass exhaustor, suction nozzle (pagoda-shape connectors), outer diameter 10mm	Φ60 flange glass exhaustor, suction nozzle (pagoda-shape connectors), outer diameter 10mm
In and out circulating nozzle of condenser coil	Pagoda-shape connectors, outer diameter 16mm	Pagoda-shape connectors, outer diameter 16mm	Pagoda-shape connectors, outer diameter 16mm
Releasing valve	Φ35 flange port*2, glass+PTFE valve, releasing nozzle (pagoda-shape connectors), outer diameter 12mm	Φ35 flange port*2, glass+PTFE valve, releasing nozzle (pagoda-shape connectors), outer diameter 12mm	Φ35 flange port*2, glass+PTFE valve, releasing nozzle (pagoda-shape connectors), outer diameter 12mm
Material discharging valve	Φ50 flange port, side discharging nozzle(pagoda-shape connectors), outer diameter 20mm, 210mm from the grount	Φ50 flange port, side discharging nozzle(pagoda-shape connectors), outer diameter 20mm, 210mm from the ground	Φ50 flange port, side discharging nozzle(pagoda-shape connectors), outer diameter 20mm, 300mm from the ground
Bath dimension/weight	Φ350*220H(mm) about 21L	Φ450*260H(mm) about 41L	Φ550*320H(mm) about 76L
Overall dimensions (WLH)	11304701940mm	12106102170mm	13907002300mm
Net weight	70kg	84kg	103kg
Packing dimensions	9805201190 ,0.61m³	10505301210 ,0.68m³	12306301420 ,1.1m³
Packing weight	107kg	116kg	148kg

Message

10-50L Explosion Proof Electric Lifting Rotary Evaporator