benchtop rotary evaporator

Product Details Characteristics Parameter Message

Product Details

Benchtop rotary evaporators use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.

Characteristics

The main bracket is made of stainless steel and aluminum alloy with reasonable structure and materials. Brushless DC motor, stable rotation, no spark, slow down by force.

All glass components are borosilicate glass (GG-17), high temperature, anti-corrosion. Bath electric lift, lift part of the deceleration by force motor, lifting process more stable.

Sealing system adopts imported fluorine rubber and Teflon two-way combination seal, long corrosion-resistant life, to maintain a high degree of vacuum. Microprocessor-based power switch control.

Vacuum gauges show real-time vacuum, oil-based table with anti-vibration characteristics.

Upright three-layer serpentine coil condenser, main cooler + double cooler, ensuring high recovery.

Continuous feeding for customer's convenience, valve type feeding valve socket PTFE tube. If there is a sudden power failure while the machine is working, the machine will stop heating automatically when the power is turned on again.

Collecting bottles are equipped with dropping materials to facilitate the collection and discharge of evaporated extracts.

Check valve control, continuous discharge, the machine in working condition, the vacuum switch.

All valves use the latest integrated hand wheel valve, sealing is good, the operation is more simple and convenient. Anti-dry function, the heating pot lower than the heating pipe, the machine will automatically power off.

.LCD full screen display, temperature, speed dual digital display, bath thermostat intelligent control, PT100-type sensor, quickly and accurately transfer temperature.

Bath electric lift, lift part of the deceleration by force motor, lifting process more stable. Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically power-off heating.

The pot is made of high-quality 304 stainless steel, corrosion-resistant and durable. The outer layer of the pot is covered with a silicone layer, which makes it safer to use at high temperature.

Tags:

Electric lifting rotary evaporator distillation

Parameter

Model	CE-100
Voltage/Frequency	380V/50HZ
Total power	15160W
Rotary motor power	120W 1/5
Lifting motor power	40W 1/12.5
Heating power	15000W
Vacuum degree	0.095Mpa
Rotary flask volume	100L,Φ610mm/Φ180 Flange port
Collecting flask volume	50L,Φ470mm/ upper with Φ80 Φ35 flange port2*lower with Φ80 flange port
Rotary speed	0-120rpm/min
Temperature.cotrol range	room temperature -180℃
Temperature accuracy	±1℃
Bath lifting stroke	215mm
Condenser size	The main condensor Φ230950H(mm) upper with Φ80 flange port lower with Φ263 flange port The assisted condensor Φ230530H(mm) upper with Φ263flange port lower with Φ80 flange port*side with Φ100 flange port
Condensation area	2.3(1.5+0.8)㎡
Gas cylinder	Left with Φ45 flange，side with Φ100 flange，right with Φ100 flange
Material feeding valve	Φ45 flange，glass+PTFE valve，feeding nozzle (pagoda-shape connectors) outer diameter 16mm
Multi-function port	Φ35 flange，glass+PTFE valve, glass nozzle (pagoda-shape connectors) outer diameter 12mm
Vacuum nozzle	Φ80 flange glass exhaustor, suction nozzle (pagoda-shape connectors), outer diameter 16mm
In and out circulating nozzle of condenser coil	Pagoda-shape connectors, outer diameter 16mm
Releasing valve	Φ35 flange port*2, glass+PTFE valve, releasing nozzle (pagoda-shape connectors), outer diameter 12mm
Material discharging valve	Φ80 flange port, side discharging nozzle(pagoda-shape connectors), outer diameter 20mm, 260mm from the ground
Bath dimension/weight	Φ700*400H(mm) about 153L
Overall dimensions (WLH)	17008502600mm
Net weight	270kg
Packing dimensions	16708601570 ,2.25m³
Packing weight	366kg