Explosion Proof Rotary Evaporator

Product Details Characteristics Parameter Message

Product Details

Explosion Proof rotary evaporator
1.Explosion-proof motor, explosion-proof aluminum shell of frequency conversion speed controller, explosion-proof aluminum shell of the control meter on the bath, explosion-proof tube with cable.

2.It uses stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.

Characteristics

The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.

The stent is made of cold plate anti-corrosive spray + aluminum alloy material, and the bath is made of 304 stainless steel.

The sealing system uses PTFE + fluororubber compound sealing. Over-temperature protection function, when the actual temperature> setting temperature+5 ℃, the machine will automatically power off.

Vacuum pressure gauge shows real-time vacuum by pointer.

The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation flask under vacuum status.

Upright serpentine coil double condensers , main condenser including two-layer coil + auxiliary condenser including three-layer coil.

.Frequency control of motor speed, explosion-proof switch, fine adjustment by knob, digital display of speed.

Thermostatic bath with temperature digital display function, with K type sensor + stainless steel probe at the bottom of bath.

The lifting of bath controlled by handwheel.

Rotating and heating double fuses safety protection. Vacuum switching valve can continuously collect and discharge materials without affecting the system vacuum and solution distillation.

The collection flask has a lower discharging port, equipped with glass + PTFE independent discharge valve.

There is a water discharging valve at the bottom of the bath to facilitate liquid discharge.

Tags:

Explosion-proof rotary evaporator equipment

Parameter

Model	CM-EX1003	CM-EX2003	CM-EX5003
Voltage/Frequency	220V 50Hz/110V 60Hz	220V 50Hz/110V 60Hz	Rotating 220V 50Hz/110V 60Hz heating bath 380V/50HZ
Total Power	3210W	5120W	8180W
Rotary motor power	EX120W	EX120W	EX180W
Heating power	3000W	5000W	8000W
Vacuum	0.095Mpa	0.095Mpa	0.095Mpa
Rotary flask volume	10LΦ280mm/Φ95 flange port	20LΦ355mm/Φ95 flange port	50LΦ470mm/Φ125 flange port
Collecting flask volume	5LΦ230mm/ upprt Φ60 flange port ×24#standard port ×24#standard port ×lower Φ50 flange port	10LΦ280mm/upper Φ60 flange port×24#standard port×24#standard port×lower Φ50 flange port	20LΦ355mm/ upprt Φ60 flange port ×24#standard port ×24#standard port ×lower Φ50 flange port
Rotary speed	0-120rpm/min	0-120rpm/min	0-120rpm/min
Temperature control range	Room temperature -180℃	Room temperature-180℃	Room temperature -180℃
Temperature control accuracy	±1℃	±1℃	±1℃
Bath lifting stroke	180mm	180mm	180mm
Condenser dimension	Main condenser Φ120×620H(mm), upper Φ60 flange port, lower Φ80 flange port Auxiliary condenser Φ135×475H(mm), upper Φ80 flange port, lower Φ60 flange port, side Φ60 flange port	Main condenser Φ130×700H(mm), upper Φ60 flange port, lower Φ80 flange port Auxiliary condenser Φ160×530H(mm), upper Φ80 f lange port, lower Φ60 flange port, side Φ60flange port	Main condenser Φ160×835H(mm), upper Φ60 flange port, lower Φ80 flange port Auxiliary condenser Φ160×530H(mm), upper Φ80 flange port, lower Φ60 flange port, side Φ60 flange port
Condensing area	0.51(0.33+0.18) square meter	0.95(0.46+0.49)m2	1.44(0.95+0.49) square meter
Gas cylinder	Left Φ34 standard port, upper Φ19 standard port, side Φ60 flange port, right Φ60 flange port	Left Φ34 standard port, upper Φ19 standard port, side Φ60 flange port, right Φ60 flange port	Left Φ40 standard port, upper Φ19 standard port, side Φ60 flange port, right Φ70 flange port
Feeding valve	34#standard plug valve, feeding valve (pagoda joint) with 12mm outer diameter	34#standard plug valve, feeding valve(pagoda joint) with 12mm outer diameter	40#standard plug valve, feeding valve (pagoda joint) with 12mm outer diameter
Multi-function port	19#standard plug valve, glass nozzle (pagoda joint) with 12mm outer diameter	19#standard plug valve, glass valve(pagoda joint) with 12mm outer diameter	19#standard plug valve, glass nozzle (pagoda joint) with 12mm outer diameter
Releasing valve	24#standard plug valve×2 pcs, releasing valve (pagoda joint) with 12mm outer diameter	24#standard plug valve×2 pcs, releasing valve (pagoda joint) with 12mm outer diameter	24#standard plug valve×2 pcs, releasing valve (pagoda joint) with 12mm outer diameter
Material discharging valve	Φ50 flange port, side discharging valve (pagoda joint)with 20mm outer diameter, 200mm from the ground	Φ50 flange port, side discharging port (pagoda joint)with 20mm outer diameter, 200mm from the ground	Φ50 flange port, side discharging valve (pagoda joint)with 20mm outer diameter, 320mm from the ground
Vacuum nozzle	Φ60 flanged glass nozzle(pagoda joint)with 10mm outer diameter	Φ60 flanged glass nozzle(pagoda joint)with 10mm outer diameter	Φ60 flanged glass nozzle(pagoda joint)with 10mm outer diameter
In and out circulating nozzle of condenser coil	pagoda joint with 16mm outer diameter	Pagoda joint with 16mm outer diameter	pagoda joint with 16mm outer diameter
Bath dimension/weight	Φ350×220H(mm) about 21L	Φ450×260H(mm) about 41L	Φ550×320H(mm) about 76L
Overall dimension(WDH)	930×560×1910mm	1000×600×2130mm	1330×730×2340mm
Net weight	83KG(52.5+30.5)	97KG(60.5+36.5)	128KG(85.5+42.5)
Packing dimension	1320×780×755mm,0.78 cubic meter	1350×670×720mm 680×680×790mm Two wooden packages 1.02m³	1420×820×720mm 830×730×910mm two wooden packages 1.39 cubic meter
Packing weight	116KG	143KG(88+55)	195KG(103+92)

Message

10-50L Explosion Proof Manual Lifting Rotary Evaporator