lab rotary evaporator

Product Details Characteristics Parameter Message

Product Details

Lab rotary evaporators use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.

Characteristics

The main bracket is made of stainless steel and aluminum alloy with reasonable structure and materials. Microprocessor-based power switch control.

All glass components are borosilicate glass (GG-17), high temperature, anti-corrosion. Anti-dry function, the heating pot lower than the heating pipe, the machine will automatically power off.

Sealing system adopts imported fluorine rubber and Teflon two-way combination seal, long corrosion-resistant life, to maintain a high degree of vacuum.

Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically power-off heating.

Upright three-layer serpentine coil condenser, main cooler + double cooler, ensuring high recovery. Vacuum gauges show real-time vacuum, oil-based table with anti-vibration characteristics.

Continuous feeding for customer's convenience, valve type feeding valve socket PTFE tube.

Collecting bottles are equipped with dropping materials to facilitate the collection and discharge of evaporated extracts.

Check valve control, continuous discharge, the machine in working condition, the vacuum switch. Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically power-off heating.

All valves use the latest integrated hand wheel valve, sealing is good, the operation is more simple and convenient.

.LCD full screen display, temperature, speed dual digital display, bath thermostat intelligent control, PT100-type sensor, quickly and accurately transfer temperature.

Brushless DC motor, stable rotation, no spark, slow down by force. The pot is made of high-quality 304 stainless steel, corrosion-resistant and durable. The outer layer of the pot is covered with a silicone layer, which makes it safer to use at high temperature.

Bath electric lift, lift part of the deceleration by force motor, lifting process more stable. .If there is a sudden power failure while the machine is working, the machine will stop heating automatically when the power is turned on again.

Tags:

Electric lifting rotary evaporator distillation

Parameter

Model	CE-1020
Voltage/Frequency	220V/50HZ 110V/60HZ
Total power	5100W
Rotary motor power	60W 1/5
Lifting motor power	40W 1/12.5
Heating power	5000W
Vacuum degree	0.095Mpa
Rotary flask volume	20L,Φ355mm/Φ95 Flange port
Collecting flask volume	10L,Φ355mm/ upper with Φ60 Φ35 flange port2*lower with Φ50 flange port
Rotary speed	0-120rpm/min
Temperature.cotrol range	room temperature -180℃
Temperature accuracy	±1℃
Bath lifting stroke	150mm
Condenser size	The main condensor Φ130700H(mm) upper with Φ60 flange port lower with Φ80 flange port The assisted condensor Φ160530H(mm) upper with Φ80 flange port lower with Φ60 flange port*side with Φ60 flange port
Condensation area	0.94(0.46+0.48)㎡
Gas cylinder	Left with Φ35 flange，upper with Φ35flange，side with Φ60 flange，right with Φ60 flange
Material feeding valve	Φ35 flange，glass+PTFE valve，feeding nozzle (pagoda-shape connectors) outer diameter 12mm
Multi-function port	Φ35 flange，glass+PTFE valve, glass nozzle (pagoda-shape connectors) outer diameter 12mm
Vacuum nozzle	Φ60 flange glass exhaustor, suction nozzle (pagoda-shape connectors), outer diameter 10mm
In and out circulating nozzle of condenser coil	Pagoda-shape connectors, outer diameter 16mm
Releasing valve	Φ35 flange port*2, glass+PTFE valve, releasing nozzle (pagoda-shape connectors), outer diameter 12mm
Material discharging valve	Φ50 flange port, side discharging nozzle(pagoda-shape connectors), outer diameter 20mm, 210mm from the ground
Bath dimension/weight	Φ450*260H(mm) about 41L
Overall dimensions (WLH)	12106102170mm
Net weight	78kg
Packing dimensions	10505301210 ,0.68m³
Packing weight	110kg