Manual Lifting Rotary Evaporator

Product Details Characteristics Parameter Message

Product Details

Rotary vacuum evaporator use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.

Characteristics

The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.

The stent is made of cold plate anti-corrosive spray + aluminum alloy material, and the bath is made of 304 stainless steel.

The sealing system uses PTFE + fluororubber compound sealing. Over-temperature protection function, when the actual temperature> setting temperature+5 ℃, the machine will automatically power off.

Vacuum pressure gauge shows real-time vacuum by pointer.

The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation flask under vacuum status.

Using upright three-layer serpentine coil as condenser, main condenser and auxiliary-condenser forming double condensers.

Frequency control of motor speed, tilt button (on-off) switch, auto-adjustment by knob, digital display of rotary speed.

Thermostatic bath with temperature digital display function, Cu50 sensor + stainless steel probe at the bottom of the pot.

The lifting of bath controlled by handwheel. Vacuum switching valve can continuously collect and discharge materials without affecting the system vacuum and solution distillation.

Rotating and heating double fuses safety protection.

There is a water discharging valve at the bottom of the bath to facilitate liquid discharge.

The collection bottle has a lower discharging port, equipped with cap type PTFE valve.

Tags:

Manual lifting rotary vacuum evaporator

Parameter

Model	CM-5003
Voltage/Frequency	Rotating 220V 50Hz/110V 60Hz heating bath 380V/50HZ
Total power	8180W
Rotary motor power	180W
Heating power	8000W
Vacuum	0.095Mpa
Rotary flask volume	50LΦ470mm/Φ125 flange port
Collecting flask volume	20LΦ355mm/ upprt Φ60 flange port ×24#standard port ×24#standard port ×lower Φ50 flange port
Rotary speed	0-120rpm/min
Temperature control range	Room temperature -180℃
Temperature control accuracy	±1℃
Bath lifting stroke	180mm
Condenser dimension	Main condenser Φ160×835H(mm), upper Φ60 flange port, lower Φ80 flange port Auxiliary condenser Φ160×530H(mm), upper Φ80 flange port, lower Φ60 flange port, side Φ60 flange port
Condensing area	1.44(0.95+0.49) square meter
Gas cylinder	Left Φ40 standard port, upper Φ19 standard port, side Φ60 flange port, right Φ70 flange port
Feeding valve	40#standard plug valve, feeding valve (pagoda joint) with 12mm outer diameter
Multi-function port	19#standard plug valve, glass nozzle (pagoda joint) with 12mm outer diameter
Releasing valve	24#standard plug valve×2 pcs, releasing valve (pagoda joint) with 12mm outer diameter
Material discharging valve	Φ50 flange port, side discharging valve (pagoda joint)with 20mm outer diameter, 320mm from the ground
Vacuum nozzle	Φ60 flanged glass nozzle(pagoda joint)with 10mm outer diameter
In and out circulating nozzle of condenser coil	pagoda joint with 16mm outer diameter
Bath dimension/weight	Φ550×320H(mm) about 76L
Overall dimension(WDH)	1330×730×2340mm
Net weight	119.5KG(82+37.5)
Packing dimension	1420×820×720mm 830×730×910mm two wooden packages 1.39 cubic meter
Packing weight	186KG(100+86)